IP Address (default gateway) | Router Login


Have you ever wondered if your router has a portal for its settings? You will want to know how to access it, and how to configure the router’s settings through that portal. However, this post is going to guide you through the IP Address login.

The portal is the administration panel, and the key to logging in to the administration panel or web interface is the Internet Protocol address. An IP address is a special string of numbers that is assigned to all hardware based devices, such as Computers, Laptops, TVs, modems or wireless routers. is one such IP address and you will find that it is meant for private networks, meaning, not everyone can access your IPV4 address, especially from a public system. is frequently assigned to wireless routers and has to be unique within a local area network. You can use this Internet Protocol address to set up an organization’s network or institute’s network.

List of Wireless Routers with the IP Address

The following wireless routers are some of the devices which have been assigned this particular Internet Protocol address:

  • Asus (also assigned other default IP addresses, depending on model)
  • Cisco (also assigned other default IP addresses, depending on model)
  • D-Link (also assigned other default IP addresses, depending on model)
  • Sitecom (depends on model)

How to Log In to Your (default gateway) Admin Panel?

Follow the steps mentioned below if you want to check out your IP address’ administration panel to figure out its features.

  • You must open your web browser and place your cursor on the navigation bar.
  • Type the word HTTP:// followed by your internet protocol address i.e.
  • You will find that your navigation bar will bring you to a portal. This is the page for you to log in to your web interface. Type the assigned administration username and password of your wireless router. Dashboard Dashboard

To find your default username and password, you must check beneath the wireless router and look for a sticker that states the default details.

If your default username and password are not enough to log in, it means that someone has changed the default settings. You must search for a small, inconspicuous and usually red button on the surface of the top or bottom of your router.

If you press this button, your wireless router will is going for the default username and password settings. If you have lost the sticker with the details, you should google the name of your wireless router followed by the keywords “default username and password.” You should test the options that are displayed. Or go through this guide to recover username & password of your router with simple steps.

Now that you have logged in to your web interface, you are probably wondering about the possibilities of the administration panel. You should keep in mind that the web interface is a portal with data, and you should look for ways to make sure that your network is secure.

Things You Can Do With IP Address

You can change the Internet Protocol address in your web interface, or try out the following features.

Block Websites and Schedule Access to Your Network

You will be pleased to know that the web interface, like all web interfaces, allows you to make your internet connection more kid safe. Your wireless router has parental control methods.

This means that you can simply block access to certain inappropriate websites. If you are a parent with a child that will always find some game site no matter how many you block, you should consider scheduling access to the network.

The router web interface allows you to set Schedule rules. First, you must select the device name and enter the MAC address. Next, you must choose the days of the week on which you want to allow internet access.

Then, you must select the time of day range. If you don’t find parental controls in your web interface, you just have to change your Domain Name System Server to an OpenDNS server, which lets you put up parental controls.

Fix Your Network Issues by Rebooting Your Router

Just as restarting your computer makes everything work better, you will find that rebooting your wireless router sometimes improves your network. Usually, you can resort to physical rebooting methods such as pressing a reboot button on the modem or unplugging your router.

If your router is in a location that you cannot access quickly, you should search your web interface for a router configuration section. Here, you will discover an option to reboot your router and you don’t even have to move from your place to do this.

Make an Existing Network Larger

The IP address is usually for private networks so if you want to extend your wireless network, you are going to need more than one router. You can do this by any means: using several wireless routers, mesh networks or netrange extenders.

But you will find it a hassle to make individual networks for each wireless router. You could avoid this by using the repeater feature of your Wireless Network Settings section in your web interface.

Netgear WiFi Extender
Netgear WiFi Extender

These settings have options such as enabling wireless, choosing repeater mode, changing SSID, defining channel width and transmission rate, and enabling Hidden Wireless or Disabling SSID Broadcast.

Using these settings you can ensure that your router joins the main network tree, and acts as a repeater for that particular network, thus generating a singular vast network from various routers.

These are some of the things you can do with an Internet Protocol address. You should keep in mind that is no different from other IP addresses, and all IP addresses have similar features.


You might face some issue with this IP address such as not working and might be many more. This is due to your Internet connection. Also, you can check your Internet connection and refresh the page. It will work like a charm.


Please enter your comment!
Please enter your name here