If you own a MacBook Pro, then you may have faced an issue where your laptop won’t start at all. Not only is this an annoying situation, but it’s also highly embarrassing especially when you need the MacBook on an urgent basis to entertain your friends or to complete some work. Therefore, it is essential to know how to fix if your MacBook Pro won’t turn on and save yourself from the trouble.
- 1 Why Won’t My MacBook Pro Start?
- 2 Top 10 Methods to Fix if MacBook Pro Won’t Turn On
- 2.1 Check the Signs of Power
- 2.2 Change the Power Adapter
- 2.3 Try to perform a Power Cycle
- 2.4 Start the MacBook Pro in Safe Mode
- 2.5 Try to reset the PRAM / NVRAM
- 2.6 Reset the System Management Controller
- 2.7 Reboot Mac into Recovery Mode
- 2.8 Check the File System for Any Modifications
- 2.9 Reinstall the macOS on Your Device
- 2.10 Seek Out an Authorized MacBook Repair Service
- 3 What to Do if the Above Methods Won’t Work
- 4 Conclusion
Why Won’t My MacBook Pro Start?
Although it is not certain that a particular issue is the sole reason behind the MacBook Pro “won’t start” issue, here are some of the most common causes behind the issue as reported by users:
- The screen is damaged, so nothing is being displayed to users.
- Your charging adapter has some issues, your MacBook Pro isn’t charging and therefore has no battery.
Top 10 Methods to Fix if MacBook Pro Won’t Turn On
If none of these problems are the cause of the problem, then you should proceed with the steps given below which will help you to fix your MacBook Pro with ease. Check out how to clean your MacBook here.
Check the Signs of Power
- First, press the Power button of your Mac and check its fan, running of the hard disk, and others.
- Check the keyboard’s cap lock key, backlit, which indicates the turning on of the Mac.
- It can be possible sometimes that the MacBook is charging but not turning on.
Change the Power Adapter
The power adapter is an essential component of your device, and therefore it is vital that you take care of it. It transfers the power and necessary voltage to your device. It is the most common reason behind the MacBook Pro won’t turn on an issue as frequent failures in power, and frequent abrupt shutdowns can damage the adapter.
Change your adapter, charge your laptop, and then check if the MacBook Pro is able to turn on. If not, you can check the other issues given further in this article.
Try to perform a Power Cycle
The following approach to fix the problem is to put your laptop in power cycle mode. For those who don’t understand the meaning, a power cycle is a technical way of resetting a device. These are some steps to follow to resolve the issue:
- Press the power button for at least 10 seconds. Hold the button one more and wait.
- When nothing is happening then make sure to unplug all of your device’s accessories, including USB hubs, mobile phones, printers, drives, and so on.
- If the screen is still black, check the brightness is not set to zero. If it is, then fix it with the help of your keyboard.
- Remove the battery from your laptop and reconnect it afterward. Attempt to restart the system now. It frequently solves common problems with many gadgets.
Start the MacBook Pro in Safe Mode
The MacBook Pro won’t turn on the issue can also be fixed by starting the device in safe mode. This will allow you to spot the errors better and perform other checks which can help you find the core issue why your MacBook Pro won’t start.
To start the device in safe mode, simply press and hold down the Shift key while you turn the MacBook on. It may take some more time than the normal switch-on process, but there is nothing to worry about. You can further push and hold the Shift, Command, and V Key while you start the Mac. Now, check the device and resolve the issue.
Try to reset the PRAM / NVRAM
If you try to start your Mac in safe mode and nothing happens, the Mac safe mode is most likely broken. now, you can try to reset the Mac PRAM/NVRAM. Resetting it will also assist in resolving the issue, and it is relatively simple to do. Simply follow the instructions outlined below:
- Make sure that your MacBook is shut down completely.
- Press the Option + Command + P + R keys together for around 20 seconds.
You may need to check the setting of the system after the Mac is finished booting up to modify the change in settings that were reset due to the NVRAM/PRAM reset.
Reset the System Management Controller
This is a significant step in fixing the MacBook Pro won’t turn on the issue if this method does not fix your issue then the only way that you would require is to reinstall the Mac OS in your device again, which many would be reluctant to do. Meanwhile, you can also check some free and paid log management tools for 2022.
To reset the System Management Controller, click on the Apple icon and select Shutdown. Hold the power button for 10 seconds after the MacBook has completely shut down.
Now, after 5-6 seconds, press the power button again, and the SMC of your MacBook Pro shall be reset. This method will likely fix your MacBook Pro. But in case it doesn’t fix the issue, create a backup of your files. After that, reinstall the operating system, which is discussed in the next method.
Reboot Mac into Recovery Mode
If your MacBook still doesn’t turn on using the regular method after all of this, try putting it into Recovery Mode. You can use the Recovery Mode features to restore your Mac from Time Machine, reinstall macOS, get online help, and utilize the Drive Utility to repair or erase your disc.
- During start-up, press the Command + R keys on your Mac. the recovery mode start-up is complete, as soon as you see macOS Utilities on the screen.
- Restore your Mac from a previous backup stored on Time Machine discs.
- Install again the Mac operating system from the disc or Apple worker.
- Open Safari to figure out what’s wrong with your Mac.
After you’ve fixed the problem, restart your Mac normally so you may use it again.
See Also: 5 Ways to Recover Deleted Files on Mac
Check the File System for Any Modifications
If your MacBook Pro won’t turn on at all, then it is entirely possible that somebody may have made some changes to the file system. Or it is even possible that you have done this accidentally yourself. To fix the MacBook Pro in this situation, check the file system for any modifications.
Just start the device and simultaneously hold the Command button and Shift key to launch it in Single user mode. After waiting for some time, a text will appear, and then type the “fsck-fy” command and then press Enter.
Now, here comes the waiting part because the file system is being checked. You may have to wait for several minutes. At the end of the checkup, if you find the message “The Volume appears to be OK,” reboot the device. And it will start.
However, if you see the message “The File System was Modified”, repeat the check until you get the first message. If after reboot, the MacBook Pro won’t turn on, try the next method.
Reinstall the macOS on Your Device
If you have examined all the above methods and nothing seems to work for your device, then this is the final method that you should employ in order to fix your MacBook Pro. It is extremely recommended that you create a backup of all relevant data before you reinstall the OS as you would lose all of it when you reinstall the OS.
To reinstall the macOS, connect your device to the Internet and then click on the Apple icon. Select Restart and simultaneously press the Command and R buttons. Then, select the “Reinstall Mac OS” option. Do not neglect to restart your device once the installation is complete. This should fix the MacBook Pro won’t turn on issue. If it doesn’t, try visiting your nearest Apple service center for assistance.
Seek Out an Authorized MacBook Repair Service
Last but not the least, If none of the above alternatives work, visit an Apple Store or an authorized MacBook repair provider. Make certain you go to an approved repair shop.
They should be able to detect and fix the issue on your Mac for you.
What to Do if the Above Methods Won’t Work
If none of the above methods, then maybe you should consider buying a new MacBook laptop. And in case you do not have the budget to get a new one, you can always buy a refurbished Apple laptop. Refurbished MacBook Pros are hundreds of dollars cheaper than a brand new MacBook though this depends on the specs on offer.
A refurbished MacBook Pro with 8GB of RAM can cost $569, but a laptop with 32GB of RAM or an Intel i9 processor could cost upwards of $2,000. Either way, you’re saving money. These devices are confirmed to be in working order and therefore make excellent replacements if something happens to your existing laptop (e.g., it won’t start).
Some retailers will even accept your MacBook Pro as a trade-in, also if it won’t work. The trade-in price will largely depend on the specs of the laptop. (the more powerful the specs, the more money you’ll get). The cosmetic quality is a significant factor too.
Laptops with more scratches, dents, and other blemishes will be worth a lot less. Less than those that look just like new and as though they have just come out of the box. You may not get much for your laptop if it doesn’t work. But it’s worth checking out the trade-in offers to see what money (if any) you can get.
These were the most straightforward steps that you could use to troubleshoot the issue when your MacBook Pro won’t turn on. even after following all the methods won’t work then you can always go for a refurbished laptop if it cost less than repairing your previous one.