Home Internet APN Settings Tracfone APN Settings | Step by Step Guide For 2023

Tracfone APN Settings | Step by Step Guide For 2023

If you are a user of Tracfone and are experiencing difficulties with the Mobile network or internet connectivity of the service, we are here to help you. You must probably be facing these issues because you have not reconfigured the Tracfone APN settings correctly to have a data connection. In this article, we will give you step-by-step instructions on how to manually change the APN settings on your smartphone to avail of Data connection and MMS through the carrier Tracfone.

You can also reach out to Tracefone support and solve the issue immediately!

Table of Contents

About Tracfone Wireless Network

The largest telecommunication company is Tracfone. Tracfone, built up and brought up in 1996, is now the most dependable company in the telecommunication world. Miami, a Florida place in the United States, is enriched with the headquarters of Tracfone. The network provider provides unlimited features for talking, texting, and data services. America Movil is the holding company of Tracfone.

Since using the Tracfone network, communication with friends and family has been very easy. The company provides 4G and 5G services, and a 5G connection gives Worldwide coverage. Also, the customers enjoy the fastest internet services with this Wireless Network company.

Working of Tracfone APN

An APN or Access point name is a set of the necessary information that connects your phone to your service provider. To have a working data connection, you must correctly activate APN settings.

Your Mobile service provider can read these settings from your mobile phone, and then they can ensure that your IP address is precisely determined and you are connected to the correct secure gateway.

Through this gateway, your phone will be connected to the internet. Your smartphone would probably automatically download these APN settings from your network carrier. But if it did not happen, you would have to enter these settings manually.

You must make sure to type in the settings carefully to avoid missing any letter or character because an incorrectly entered APN settings can cause you to lose data connection and Multimedia Message Services.

Once you have made a note of these Tracfone APN settings, you may proceed to reconfigure the settings. You must make sure you have purchased the correct data plan that your phone is compatible with to reconfigure your APN settings.

The following are the steps to reconfigure Android, iOS, Windows Phone, and Blackberry settings.

See also: AT&T APN Settings | Step-by-Step Guide

Tracfone APN Settings for Android

Here are the requirements for Tracfone APN Settings for Android.

APN Name: Tracfone
APN: TFDATA
Proxy: proxy.mvno.tracfone.com
Port: 80
Username: Keep this blank
Password: Keep this blank
Server: Keep this blank
MMSC: http://mms-tf.net
MMS Proxy: mms3.tracfone.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: PAP
APN Type: default
Protocol: IPv4
APN Roaming Protocol: IPv4
Bearer: Keep this blank
MVNO Type: Keep this blank

See also: Verizon APN Settings | Step-by-Step Guide

How to Configure APN settings for Android

The steps are shown below for configuring APN settings for Android.

Open Settings
You must click on More from the Settings list
Select Mobile networks under More
You can proceed to the Access Point Names option under Mobile networks and type in the Tracfone APN settings from the information we have given below.
Finally, you must reboot your phone and try out your new settings

Tracfone APN Settings for iPhone

Here are the requirements for Tracfone APN Settings for iPhone.

APN Name: Tracfone
APN: Reseller
Proxy: Keep this blank
Port: 80
Username: Keep this blank
Password: Keep this blank
Server: Keep this blank
MMSC: http://mmsc.cingular.com
MMS Proxy: proxy.mvno.tracfone.com
MMS Max Message Size: 1048576
MMS UA Prof URL: http://www.apple.com/mms/uaprof.rdf
Port: Keep this blank
MCC: 310
MNC: 410
Authentication Type: PAP
APN Type: default
Protocol: Keep this blank
APN Roaming Protocol: Keep this blank
Bearer: Keep this blank
MVNO Type: Keep this blank

How to configure APN settings on iPhone

The steps for configuring APN settings on iPhone:

Open the Setup section of your iOS device, which could be an iPhone or tablet.
Select General under the Setup.
Tap on Network in the General section of your device.
You must select the Mobile Data option under Network and type in to fill the boxes with the Tracfone mentioned above APN settings.

Finally, you must save your changes, exit the options, and reboot your device.

See also: Sprint APN Settings | Step by Step Guide

Tracfone APN Settings for Windows Phone [Internet APN and MMS APN]

Here’s the list of requirements for Tracfone APN Settings for Windows phones.

APN Name: Tracfone
APN: Reseller
Proxy server: proxy.mvno.tracfone.com
Port: 80
Username: Keep this blank
Password: Keep this blank
Server: Keep this blank
MMSC: mmsc.cingular.com
MMS Proxy: Keep this blank
Port: Keep this blank
MCC: 310
MNC: 410
Authentication Type: PAP
APN Type: default
Protocol: Keep this blank
APN Roaming Protocol: Keep this blank
Bearer: Keep this blank
MVNO Type: Keep this blank
IP Type: IPv4

How to Configure APN settings on Windows phones

The following are the steps for configuring APN settings on Windows phones.

First, you must check if your phone is accepting the Tracfone SIM. If it is not, you will want to call the closest Tracfone service provider.

Proceed to your applications section and select Settings
Then choose the option Cellular + SIM under Settings
Now, move to SIM settings from the Cellular + SIM option and then tap the option, add Internet APN
Next, you should type in the values given below in the settings
Save the changes you have made and exit the settings. Finally, you must reboot your device

Tracfone APN Settings for Blackberry

Here are the internet and MMS APN settings for Blackberry.

Internet APN

The requirements for Internet APN for Blackberry are given here.

Access Point Name: att.mnvo
Username: Leave blank
Password: Leave blank

MMS APN

The requirements for MMS APN for Blackberry are given here.

APN: att.mnvo
MMSC URL: http://mmsc.cingular.com
Proxy URL: proxy.mvno.tracfone.com:80

How to configure APN settings on Blackberry Phones

Here are the steps for configuring APN settings on Blackberry Phones.

You must select the Settings icon of your Blackberry phone
Under Settings, open Network Connections
Go on to choose the section named Mobile Network under Network Connections

Select APN, which you will see at the bottom of the screen. Type in the Internet APN settings
You must save these changes and go to the main menu
You must select Text Messages and tap on the dots
Select Settings and choose Text Messages
Under MMS and Advanced, you should type in the MMS APN settings
Finally, you must save the changes, exit the options and reboot your device to try out the Tracfone service

FAQs

Which type of network is recommended for Tracfone?

All Tracfones have different network requirements. Those mobile phones whose name ends with the letter G basically use a GSM network. The GSM network is the resemblance to AT&T mobile or T-mobile. After the increased usage of Android phones of Tracfone in recent years, the popularity of GSM Tracfone is gaining. Uses are now more comfortable with the CDMA services.

What are the steps to set my APN to use the data services?

First, to use the APN for the data services, visit the home screen and then go to the menu option. From there, go to the settings and choose the option of mobile networks. Click the preferred access point name and click on the new APN setup option. Then fill in the name of your choice and confirm. This will help you use the APN data services of Tracfone.

What are the steps to reset my APN on the Tracfone?

To start with, go to the settings option on the main screen. Then on the settings, navigate to Network & Internet. From there, choose the option of the Mobile network. To access the additional options, view the advanced settings. Then check if the Automatically selected Network is turned on.

How to repair my Tracfone not connecting to a network error?

In this case, check if the phone is activated correctly or not. Because this is the standard error shown when phone activation is not done properly. Also, check with the SIM registration. The other reason could be exceeding the minimum daily usage of the data plan.

What is the process to register Tracfone to the network?

If the Tracfone is not registered to the network, select Activate and go for I have Tracfone. Then, input the IMEI or a phone serial number in the space provided. Then look at the Terms and Conditions of Tracfone and Confirm for the same.

Why is the Tracfone always displaying not registered to the network?

For this issue, check if the phone is updated or not. If not, download the recent updates. Also, one reason could be that the SIM must have gone bad. Check for the carrier settings on the phone. Fix the carrier setting by choosing a carrier if not chosen or fix the outage experience.

Conclusion

These steps include manually typing in your new APN settings on different devices. Regardless of the device, once you’ve typed in the APN settings, saved them, and restarted your device, you can enjoy your Tracfone mobile internet service.

You can always reach out to Tracefone support if you still face issues.

You will also be pleased to know that the Tracfone network services are very affordable and even the most convenient and least expensive option for users who make below-average calls. Although it does not allow for international messaging, it generously provides cheaper international calling.

So we hope that our instructions and a step-by-step guide to set up your Tracfone APN settings manually helped you solve the problem you are facing with your mobile internet connection or multimedia messaging service.

Also Refer: Family Mobile APN Settings | A Step-by-Step Guide